Mend Canon Photocopiers

Find out how to mend it for free.

Ask Question

Click here to mend Canon photocopiers

Mend photocopiers ...

Mend Photocopiers

Mend > Photocopiers

I have a error code e007-01 on my canon gp215?

I have an error code e007-01 on my gp 215 photocopier.I've checked the fuser-everything looks in place.I've rotated the gears and they are moving freely. How do I get into the service diagnostic to reset and clear the code?

mustafa tahir
January 2008

Canon Office Appliances, Photocopiers Canon Gp 215

i have a error code e007-01 on mycanon gp 220

dipak
May 2015

plat giear unit,open back cover then see power pcb & remove power pcb then see plat giear

akash
February 2014

how can i fix it temporarily

trix
July 2011

Toyota Corolla 91 GTI
At Operating temp the car misses when pulling off at low revs (at full throttle it generally clears)
If I disconnect the Senor on the front of the air box or the throttle position sensor the miss firing stops. This indicates there is no problem with the coil or spark side of things.

If I disconnect these sensors does this instigate a base setting with the ECU that overcomes whatever the problem is or is the sensor I have disconnected likely to be the fault ?

Alex
March 2008

The GP125 is now quite an old machine. E007 means that an error has occurred with the fixing unit. This is the hot bit the paper goes through just before it comes out of the machine. It consists of a lower roller and above that a thin loop film of thermal plastic with a ceramic heater inside it. It is almost certain that this film has become dissplaced or damaged. E007 means that this film is not rotating correctly. It will need a new fixing unit.

Bob
January 2008