Recent: Ge tfx30pr?

Mend > Washing Machines

Mend Cycle Pcb Machine

what if C4 shows on each cycle? Would htat be the pcb?

Many thanks for the previous answer, much appreciated. I've had another look at the machine and noticed that on each of the options / programs the machine , after a few seconds, flashes a red light on RINSE+ and then shows C4 fault code. Would this more likely point towards the pc board? Thanks

Mark
January 2008
the pcb is diagnosing a fault which it believes is coming from a faulty circulation pump.it can't diagnose pcb its self so you have to check external before condemming pcb as they are expensive

ck
January 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Cycle Pcb Machine

Related Questions ...

Mend washing machine miele pcb
3

Miele W863 flashing rinse light no drum movement?

My Miele W863 suddenly stopped mid cycle with rinse light flashing. Having read the forums I have fitted new m... [Read more]
Mend washer dryer drain pump PCB
1

WIDL126S washer dryer confused machine. ?

My Indiset washer /Dryer seems very confused. Started a wash cycle and it stopped not long in and a steady fla... [Read more]
Mend washing machine PCB motor
2

wont tumble or spin?

my wf860, when setting the programs, they seem to enter on the led display, when you press the start button t... [Read more]
Mend power surge working
1

Hotpoint Wf740 power surge?

My hotpoint WF740 has stopped working since we had a nearby lightning strike - I suspect the main PCB is gone.... [Read more]
Mend main wash machine
1

Flashing main wash light Miele W838 washing machine?

From perusing many forums, I learnt that when the main wash light keeps on flashing this means there is a faul... [Read more]
Mend fill machine washing
1

Water does not fill the machine as it should only during the main wash cicl?

Miele Novotronic W820 Washing machine Water does not fill the machine as it should only during the main wash ... [Read more]
Mend help panel door
2

My John Lewis JLWM1202 is nearly dead! Help!?

The display and panel lights are dead; however, the door lock light does come on when the dial is in any posit... [Read more]
Mend washing machine control board repair
2

indesit wil153 w/machine?

machine won't complete cycle.starts then stops with all lights/leds flashing. I've replaced front right contr... [Read more]
Mend aeg not working
2

Why is my AEG Lavamat 6100 not working?

Hi - my AEG OKO Lavamat 6100 is not working. There is no power to the machine. The on/off light is not lit. Th... [Read more]
Mend washing machine drain pump PCB
7

wma 36 wont drain on end of wash cycle?

Help. My wma36 stops at the end of the wash cycle and displays all lights - wash/rinse&spin/final spin. I chec... [Read more]
Mend zanussi checked brushes
1

zanussi washer/dryer?

ck thanks for your reply i have checked the brushes they r more than 10 mm no water or foam went in the pcb al... [Read more]
Mend washing machine fault drain pump
4

Rinse and Spin Faults on Beko WMA 745 W?

The washing machine is not long past it's guarantee, and the fault started last week. First symptoms were tha... [Read more]
Mend wie 147 wash
1

Indesit WIE 147 Fails to start any wash cycle ?

Indesit WIE147 shows error f12 I have checked the connections between the two pcb`s but no joy . What we did n... [Read more]
Mend zanussi stuck mode
1

for Dannyboy and CK zanussi wjs1265s stuck in 2secs. spin mode?

Thanks guys for your previous attempts to solve my 2secs. spin mode problem iha ve checked all the things you ... [Read more]
Mend washing machine pump blockage
2

hotpoint wmm53 not pumping water?

my washing machine does not drain hence no spin.Checked for blockages including filter,changed pump pcb was bl... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...