Recent: Home max fs506x?

Mend > Home Alarm Systems

Mend Veritas RS12 After Power Cut

How can I silence my Veritas home alarm after a power cut?

Had a power cut at my house last night (3am) - outside alarm flashing with audio warning, the keypad had no power so I was unable to turn off the alarm- sound continued for 15 minutes before stopping. Power resumed at 3.30 when I reset the alarm before it went off again. A second power outage occurred at 4am- again I was unable to turn off the audio alarm- very anti social for my neighbours. Anyone know how to silence the alarm and save my embarrassment?

Phil Davies
January 2008
Hello, we have had the same problem. I believe that it is because the backup battery needs replacing. Ours is in the loft so haven't had a chance to do it yet. It is very embarrassing when people know you are at home but you haven't stopped the alarm isn't it!

Diane
March 2008
Hi Phil,

I have the same problem and I have been told that it's probably due to my backup battery being flat. I was also told by the alarm folk that if you cut the power and remove the backup battery, it should silence the alarm. I'm going to try this tonight.

Good Luck!

Thrashin
January 2008

Automatic Answer

We may have found other answers which could help you.

Click here for After Power Cut

Related Questions ...

Mend sensors alarm power
1

Door sensors?

After a power cut my 9827 general alarm works but not the door sensors?
Mend problems power cut
1

i-on 16 ?

i am having problems after a power cut i am getting 'panel A/C fail' i have gone into the main consumer unit a... [Read more]
Mend long manual alarm
1

how do you restart an Omnicron 6000 after a long power cut?

I Have no Manual for this alarm.
Mend security system alarm panel
5

Optima XM Alarm panel dead?

I was replacing two light switches. Turned of power to them. Only after job was done did I notice numerous LED... [Read more]
Mend problems power cut
2

Problems after a power cut?

The keypad tones have changed The outside bell box blue light is flashing The outer hall sensor picks you up... [Read more]
Mend alarm going cut
1

Accenta 8 alarm going off after power cut?

Came on here looking for answers to switch off the alarm. I've seen a lot of thank you messages to some guy ca... [Read more]
Mend bleeping alarm power
1

alrm keeps bleeping?

veritas alarm keeps bleeping after power cut
Mend accenta power lit alarm
1

Accenta 6 RKP no power, but numbers lit after powercut?

I have an accenta 6 alarm system, after a power cut the RKP is not working - the numbers are lit but the red p... [Read more]
Mend security home system
1

How do I prevent my Optima Plus alarm system going off!?

Twice in the past week my Optima Plus Home Alarm system has gone off in the middle of the night & I have been ... [Read more]
Mend accenta alarm strobe flashing
1

Accenta Alarm Strobe flashing?

Hi I have an Accenta G3 which is about 10 years old. We had a power trip the other day and now the strobe w... [Read more]
Mend system power cut alarm
1

Gardtec 800 system error code -t after power cut?

We had a power cut this morning for all of 5 minutes. In the past, the alarm system has come back on and the ... [Read more]
Mend system accenta power
1

anti rattle indicators?

sorry forgot to mention name of system, it is an Accenta g3 and after a power cut yesterday 3 anti rattle indi... [Read more]
Mend battery house installed
1

Vertitas 8C alarm - internal battery keeps dying?

Hi I have a Veritas 8C alarm in my house which was installed prior to moving into the property 4 years ago. ... [Read more]
Mend power cut set
2

how do i fix my alarm ( securit 700l plus )?

After a power cut my alarm does not work and it is not possible to set or reset I have checked the fuse and fo... [Read more]
Mend accenta keypad power
1

accenta alarm ?

Keypad frozen after power cut

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems