When i turn the ignition on my battery light flashes. A new battery light and a new alternator has been put on. When i turn the engine over there is a knocking/ clicking noise. The car wont start at all, the immoboliser and central locking also will not work. Does anybody have any idea what is up with my car? Any help would be more apprecitated!
when i turn the ignition on to start my rover 214 it just makes a klicking sound
ste
November 2011
car run out of petrol now wont start at all but turns over normal
stewart
August 2011
my rover will start perfectly for 3 days then not at al have no idea what the problem is once it started perfect next day nothin any ideas
james
January 2011
there is a a delay sometimes when i turn the key, the engine will not turn over.i have new battery new starter motor
paul p
November 2009
there is a a delay sometimes when i turn the key, the engine will not turn over.i have new battery new starter motor
paul
November 2009
get a decent motor.
porche
October 2009
hi some rovers have a barel problem so if u have a lot of key on your rover key it will not start so just put your rover key and fob and 1key ring and that may work and reset the inmobliers by lock your car 3times and then unlock 1 time
thomas
August 2009
I have exactly the same prob. lso the fuel is not pumping through any definite fixes on this yet
TOM
March 2009
i would get alarm chack they some time need resetting
steven wright
May 2008
my rover wont start no spark to middel plugs
dean jasper
April 2008
Try changing the 15amp fuse for the door central locking. Just had Green flag out they had no idea then hey presto!!!. This may not work but it did for me and only cost £1
Muscadet
February 2008
did you ever fix this? I have exactly the same issue - chattering when you try and start the car, plus central locking and immobiliser issues.
I think it's something to do with power. could be a battery or alternator problem.
Did anyone ever get to the bottom of this one?
Mark
February 2008
hi in my rover when it wont start i take the wire of the top of the starter motor and clean it with sand paper and put it back on and then it starts my uncle also has the same problem and it works for him but make sure the ignition is of or it will give you a belt
hope it helps
evoracer
January 2008
Hi Elaine firstly try new plug leads, i think the problem may be the solinide i havent spelt that correctly sorry. What i would do is to remove the solinide from the motor clean with white spirit this is your cheapeast option. What tends to happen is oil mist gets into the brushes of the solinude and slows it down
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.