Half the time the program goes through 80% of the cycle and then stops. Sometimes it goes all the way through and sometimes 90%. It is if the power is switched off. It would seem like a power supply overheating problem. It will not restart for a few minutes after this shutdown. Anyone have experience with this type of fault.
Thanks
John
I have similar problem I replaced the relay on the circuit board and it worked for a month and now same problem again. Dishlex man said it needs a new board but nearly the same price as new dish washer.
Glenn
February 2008
I too have had a similar problem with Dishlex 450. The fix was to clean out the upper water inlet which screws into the ceiling of the dishwasher and allows the water to be sprayed into the upper spray arm.
Just unscrew it & clean out the accumulated gunge & while you're at it give all the internal filters and lower spray arm a good clean.
Tim Allen
January 2008
Automatic Answer
We may have found other answers which could help you.