Mend > Steam Irons

Mend Russell Hobbs Generation Steam Iron Replacement

my russell hobbs generation iron will not produce any steam at all?

my russell hobbs generation iron will not produce any steam at all, however it is half full with water.
could it be the filter causing the problem, is this a sign that it needs replacing?
please help?

joanne loach
December 2007

Russell Hobbs Russell Hobbs Generation Household Appliances, Steam Irons Steam Iron Russell Hobbs Replacement

My iron is not getting hot.
Any suggestions?

jill
August 2014

very little steam making a racket

anne
August 2013

It just makes this awful racket and produces no steam,the pipe running from the iron to the base doesnt get warm at all,it used to when workin,the iron gets hot but no steam.

wendy reed
September 2009

I had the same problem and have narrowed it down to the pump because I could not here the pump running when I pressed the trigger on the iron. I opened up the base unit (3 screws underneath) the pump is a square unit at the water tank end. A smart tap with the handle of the screw driver and the pump started working again.
I'm currently sourcing a replacment pump!

dave
December 2007

I had the same problem! it was solved when I realised the filter wasnt lined up properly so the steam went through the unit into the iron.Make sure the filter opening fits into the unit correctly.
It works brilliantly now.

Gwen Young
December 2007