I have just changed a low preesure switch on a Potterton Puma 80e. When I recconnect the two cables the boiler does not fire up. If I leave the cables off the boiler does fire up but then the pressure increases. I have taken the pressure switch off and cleaned inside and made sure there is no blockage before fitting the new pressure switch. I have tried releasing air on pump but no joy.Do not know what else to check as the cables must be connected but then I am left with no DHW or CH!!..please help.
Just fitted new water pressure switch and had same problem.It came with insulation on wrong terminal. Moved insulation to terminal 3 and connected wires to terminal 1 & 2 (normally closed) Now works fine. Hope that can help
jay
November 2007
how many terminals are there on the switch?
barry
November 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
