i changed the fan on my ff240 ideal classic and when i test it with the casing removed the main burner stays lit but as soon as i put on the casing the main burner goes out but keeps trying to light sometimes it lights but goes out immediately. has anyone got any idea as to the probable cause. I put everything back the same way that i removed it
sensing tubes are blue to gas sensor white to l on aps switch and red to h on switch is this correct
jc
November 2007
red to the outside of fan blue to inside, white to hood
jc
November 2007
are the pipes on the right way around
barry
November 2007
no its not blocked if i leave the casing off it works fine but as soon as i put the casing back on it fires up but then goes out immediately as if the flame is blowing out or the gas cutting off with the casing off warm air blows out off the flue as it should
jc
November 2007
u said the wind comes in where the flue exits, you havent blocked this up have you ?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.