dgm monitor won't switch on?

hi my DGM L-1936WD wont come on
that's all it does when I press on button flicks between red and green

DIRK

April 2020

There is more help available. Mend - monitor, wont, switch

Another possibility is that it get no signal. Double check that the cable between the computer and monitor is correctly inserted at both sides. There may be some corrosion or the contacts may be dirty. Disconnect and reconnect a few times. The cable may be damaged. Try with another cable. Electro April 2020

Hi Dirk,
I can offer one suggestion that may help and that is to check the power supply transformer, as this may have failed.
Try using a different transformer and see if that fixes the problem. You'll probably have a suitable spare transformer somewhere in the house, by locating any other electronic devices that also have transformers, and then see if you can find one that has the same voltage output and same sized connector. If you do, double check the polarity of the connector is the same too. (This polarity info will be on the transformer label and is a little diagram that has a dot with a circle or C shape round the dot and two straight lines each leading to a plus or minus sign) make sure this diagram is the same if trying a different transformer.

Rupert

April 2020

Add An Answer Form

Add your answer using the form below ...

Other questions in this category - Computers, Monitors

acer hdmi v273hl--several lines down?

ACER HDMI V273HL--LINES DOWN About 10 or 12 diff. coloured vertical lines down is it poss. to get rid of them...

Click here for how to mend it.
Sharp ZQ-700 Electronic organiser?

I have a Sharp ZQ-700 electronic organiser. When I start it up only the contrast window appears. I cannot access anything else. What can I do?...

Click here for the fix.
Lack of sound through monitor?

I can only get sound through headphones attached to my modem. I assume I have to attach a cable between the monitor and the modem to get sound. Could someone kindly tell me which Do I have to plug it in the In Or Out and where the other end of the cable Goes into on my Dell modem. Sorry it's so vag...

Click here for how to mend it.
disable process in task manager?

How do i permanently disable a useless program/process in task manager. i did this --but they came back?? thanks j...

Click here for how to mend it.
how can i fix a packard bell utowsan mswhql n ?

my monitor sayswindows could not start because the folling file is missing or corupt [windows root]/system 32/hal.dll.please re-install a copy of the above file....

Click here for the fix.
innotab 3 downloaded game ?

i had games downloaded onto innotab 3s.turned it on today and games have gone.when i plug it into my pc the games are showing as though they are transfered onto the innotab but they are not on it anywhere.any advice pls as i have a very unhappy little boy...

Click here for the repair.
fixing mouse?

when i am looking to find something, and i try to scroll up and down pages instead of going slowly it jumps up quickly as if it is jumping to next page,,i dont know how to stop it doing this....

Click here for how to mend it.
How can I fix my vga connector on Proview MA-782KC / Proview 700p?

Vga connector break/ came off trying to replace need pin out from vga connector to where cable connect to pcb no monitor...

Click here for the fix.

			Ask for free help
:: home :: add a question :: search		:: help :: most recent :: unanswered
	Search: Go

dgm monitor won't switch on?

hi my DGM L-1936WD wont come on that's all it does when I press on button flicks between red and green

There is more help available. Mend - monitor, wont, switch

hi my DGM L-1936WD wont come on
that's all it does when I press on button flicks between red and green