Miele W863 flashing rinse light no drum movement?

Also found this link which makes good reading https://youfixit.eu/en/miele-pcb-el200-repair.html covers a whole series of Miele W series machines.

Mike
May 2020

Thank you keymatic (March 2020). First I took the PCB out checked and re-soldered the fuse and relay no change. Finally attacked the motor, the connectivity was poor so I cleaned up the commutator and motor coils ending with a good squirt of WD40. Put it carefully back together connectivity much better. Reassembled whole machine and put it on a spin cycle. Success 800rpm doddle. We now have two working Miele washing machines that will probably outlive me.

Mike
April 2020

when you fitted the replacement brush set were the old ones worn ? if worn when you fitted new set did you clean off the commutator on the end of the armature as there may be bad connection there due to previous arcing. Ideally before refitting the motor you should check for continuity between circuits. if the motor reads ok you would need to check the loom right back to the pcb for breaks

keymatic
March 2020