X9 Piaggio 250 Evo Indicators.?Does the above scooter have two indicator relays, one for left and right?
My left indicator is working fine but the right indicator doesn't, which leads me to believe there may be two relays if I can find them....Click here for the fix.
Piaggio ?50 moped ?does the oil ?2stroke go in the filler next to the gasoline filler ??? the oil that is in is more like engine oil ??...Click here for the fix.
My piaggio 50 has been standing over a year and wont start ?Put a new batd?My piaggio has been standing for well over a year I bought it but did nothing with it till now ? Ive bought a new battery stuck it on to no avail / it seems like fuel starvation and nothing getting through into the head ?? dry ? spark plug ? fuel ids running / oil is running ? ? no avail / but if...Click here for how to mend it.
piaggio zip?put diesel in petrol tank , rode for half a mile before it cut out , pulled fuel pipe off and drained tank , will replacing petrol line and refilling and running petrol through get bike going again ? Not mechanically minded is it a big job if not ?...Click here for the fix.
Piaggio relay?Hi trying to start my piaggio x9 125 2001 turn key hold in brake leaver all I here is click click from the relay at back so I took relay of and bridge the red wires lots of sparks and smoke but this turned the bike over can some body tell me is it the relay that has stopped working just clicking man...Click here for the fix.
piaggio x9 250 lumping?lumpy running and wont tick over. runs fine without air filter. fitted new filter and plug and its back to lumpy running after about 10 miles...Click here for the fix.
piaggio 400 cc scooter refuses to start ?piaggio xevo 400 cc (08) won't start. the engine spins over really well. suspect fuel starvation due to evaporation. Not used for 4 weeks. Have experienced the same problem during September and the engine started a few days later and is running really well. Have the bike serviced by dealer annually....Click here for the repair.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.