They are 24hr type zones.
To isolate as in remove from system you need the engineers code.
If you do not and this is a "Policed" system, you will have a visit and 1 false alarm mark against you.
Citadel xr2 constant alarm!!?I have a citadel XR2, which I have replaced the backup battery, and now the alarm is constantly ringing both outside and at the keypad.
The keypad will not take the code to turn the alarm off.
I have checked the fuses with a tester and they are fine.
is there anything else I can do, before the...Click here for the fix.
Citadel XR2 upstairs remote?On my remote keypad when you press the security code on the figure 1 you can hardly hear any sound, whereas the rest of the numbers are ok, any ideas...Click here for the fix.
Citadel xr alarm?Hi can't stop the alarm ringing when we connect new battery,tried the code but it dosent seem to work.
Please help....Click here for the repair.
Delay alarm going off citadel?Hi
It's me again! I have a new problem now and I was wondering if you could help seen as you did last time.
When I set my alarm, the pir sensors in the rooms do pick you up so I know they are working. However, once the alarm has set, if I walk into a room the alarm does not go off until about 1hr...Click here for how to mend it.
citadel xr2+ tamper mode?I have a citadel xr2+ and am wanting to put it into tamper mode so that I can fit a new sensor without the alarm sounding continuously whilst I do this. Any idea? I've read the manual but cant seem to find the answer. I know its possible because an engineer has done this previously when fitting sens...Click here for the repair.
citadel xr2?i have a citadel xr2 alarm and chirps every one to two minutes. it sounds like a smoke alarm battery when it is getting low on power...Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.