receiver flashing red for hours.green light constant.hot water coming on fine.no central heating for a week now.new rechargeable batteries in thermostat.flame in thermostat flashing.wireless signal transmitting.turn thermostat up keeps going back to 19c.have a Glow-Worm condensation boiler.3 years old.have no boiler cover typical.never got round to itTOO LATE now.and its getting cold as well.
What can I do about a Glow-worm Flexicom 30cx fault code F11?I had a new boiler fitted in April this year. Last eve it stopped working, showing f 11. We have not been using the central heating, only hot water, for several months. In May it showed F25, but we bled the radiators and reset boiler and it has provided hot water ever since - but we have not used...Click here for how to mend it.
how can i fix my central heating. Glow-worm ultimate.?my boiler fires up and heats the rads . after about an hour the rads go cold, but the boiler keeps fireing
can anybody help....Click here for how to mend it.
Glow-worm micron 60ff boiler niosy ?when heatingMultifunctional control comes on hear a loud buzzing noise from the multi funtional control bottom right of boiler...Click here for the fix.
Intermittent boilet fails to fire on heating?I have a 5 year old Glow-worm CX35i controlled by Drayton Digistat SCR and analogue timer (on the panel). The boiler is failing to fire on heating demand by the timer and also the 'on/off' switch on the analogue timer. It fires fine on hot water demand, so I guess the igniter is fine and the probl...Click here for the fix.
water from taps is boiling hot?The boiler thermostat and the hot water tank thermostat are both working but this morning the water coming out of the taps is boiling hot. Any suggestions would be greatly appreciated. Glow-worm fulesaver F
Thank you...Click here for how to mend it.
Glow-worm 30cxl?Started off blowing 3amp fuse in boiler, water cold but heating working ok, engineer came out and fitted a service kit to the motorised valve, then the rads. kept getting hot even when heating was turned off at the clock, engineer came out and fitted a new motorised valve but the rads. are still get...Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.