my wma74 was working fine yesterday. today however when selecting a wash programme it makes a noise of water entering the machine and takes the detergent from the tray however the drum doesnt turn or fill with water then displays the word 'ON'!! have turned the machine off at the wall hoping it mayy reset but no joy! Can anyone advise please???
how do i fit a door gasget to a hotpoint WMA74 washing machine?I need to fit anew (non smelling )gasket to our Hotpoint washing machine it sits between the door glass and the drum. it looks quite a problem without taking most of the machine apart. Can I get please a HAPPY answer to this Question
With lots of hope Mike...Click here for how to mend it.
Hotpoint wma74. Machine continually beebs?Have requested a wash cycle and the machine has gone through its usual process of showing time and spin speed. It then continually beebs with the lock light flashing and will not lock or start the wash cycle....Click here for the fix.
hotpoint wma74 not emptying water?washer runs halfway through cycle then goes to end without emptying water. took rubber filter off bottom of drum found coins in bottom took coins out but still does same can coins like a 5 pence get through to pump.it also makes a slight buzzing noise...Click here for the repair.
hotpoint wma74?My WMA74 will not complete a full wash cycle unless its on a fast wash or if the drum is empty. When cloths are placed in the machine and any program is selected it will wash as normal but will stop/get stuck before the rinse/spin. The drum it self moves round fine. If I then select a rinse/spin it ...Click here for the repair.
hotpoint wma74?The machine will not finish a full wash program or rinse or spin, however when doing a fast wash it works fine. Any one know what the problem is and how I can fix it. My machine is only about 6 years old....Click here for how to mend it.
Hotpoint WMA74 Dead?My hotpoint WMA74 is dead getting 240volt to circuit board but no read out on display. Can anyone help .Thanks...Click here for the repair.
how can i fix my Hotpoint WMA74?Hotpoint WMA74, the door locked signal is always on display, the machine in not responding to any cycles, the water is not draining, and i can't open the door when the machine is on...Click here for the repair.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.