I fitted a new performance exhaust on my son's ped. It ran beautifully on the first day and he was out on it for about an hour. Next day it ran for about a minute and then stopped. No spark! Battery is charged and can handle a load put across it. Disconnected coil no power appears to be going to it when cranking the starter. This thing is just over a year old and well cared for and serviced so I'm hoping it's not the generator. Any clues, and where's a reliable place to get spares?
Thanks
Alan
Adam, thanks for that and yes have tried that. Finally ended up going over the bike armed with Haynes manual and meter. Bought a new magneto (generator). Fitted that and success! One week later won't fire again. Either I have been really unlucky and bought a defective prt or something is causing the magneto to burn out!
Alan
December 2007
Hi
have you tried kick-starting the bike because sometimes the starter motor uses more power than is needed and that means that no power goes to the coil on crankover.
Adam
ADAM UPTON
December 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
