circuit diagram for zanussi tc470?

Richard, I have A Zanussi TC 470. Am I right in saying that the controller has 28 spade connections on one surface. Two of the spades have soldered connections to the pot. on the rear of the controler. Eleven spades do have connections of which three have two wires in each, one of which is a jumper to the eleventh spade. The remaining fifteen have no connection at all.
If this sounds like the info. you are looking for please e-mail me at j_dcourier@yahoo.co.uk
May be you could assist me. What route does the belt take round the drum, motor and tensioner?

John
May 2005

your not going to get one

11
May 2005