Recent: Finding correct positions for the cogs?

Mend Scantronic 9448 Home Alarm Systems

Mend Security Systems, Home Alarm Systems
Find out how to mend it for free.
Ask Question
Mend Security Systems, Home Alarm Systems
Mend repair fix Scantronic 9448 home alarm systems

Mend Home Alarm Systems

Mend Security Systems, Home Alarm Systems

How to Reset Optima XM6?

How do you reset the optima xm6 alarm, i know this is done by shorting out 2 terminals on the main board but i... [Read more]
Mend house alarm optima
1

How long does house alarm go for?

I f my optima plus 2 house alarm operates when I am away from home how long will the alarm go on for
Mend Security Systems, Home Alarm Systems

What category of alarm is a scantronic 9884?

what category of alarm is a scantronic 9884+, please?
Mend Security Systems, Home Alarm Systems

How do i deactivate siren on lp1-4000?

how do i deactivate siren on lp1-4000
Mend Security Systems, Home Alarm Systems
3

Scantronics 9450 box stuck shut?

Scantronics 9450 house intruder alarm I cannot get into the box to change the battery. Is there a knack to it?
Mend Home Alarm Systems

Mend > Home Alarm Systems

Mend Scantronic 9448 Security Alarm Battery

Scantronic 9448 stopped working?

Had it 2 years, this morning it woke me up as it was going off (thought it was the cat). Now it has a flashing top light and when I try to set it the top 3 red lights flash and it fails to set. It is also really quiet and the external bell seems to have stopped as as the 3 pir's. Is this simply a new battery fix ( also 2 years old obviously)??

Any help appreciated

Jools
November 2007
ScantronicScantronic 9448Security Systems, Home Alarm SystemsSecurity Alarm Battery
The flashing power light means you need to find out why there is no mains power to the panel - has a trip activated on your fusebox ?
The three lights could relate to PIRs tht are not working due to a blown internal fuse inside the panel. If you are not familiar with electrical fuse replacement call an engineer.

Alarm Engineer Bristol
November 2007
OK after I found a manual it seems that the mains power light is the one that is flashing (should be steady on) and the exit/entry, zone 1 & 2 are the 3 red lights that alternatively flash when I try and set the alarm, hope it helps.

Jools
November 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Security Alarm Battery
Mend security system scantronic

Disable Alarm Scantronic 9800?
Mend alarm security system home security

Scantronic 9651 alarm?
Mend smoke security system

Reset system after smoke alarm sounds & user manual request?
Mend alarm security system battery

Scantronic 9427 Alarm?
Mend alarm scantronic reading

Alarm?
Mend alarm panel home alarm scantronic

House alarm Scantronic 9427?
Mend system reset scantronic power

SR system reset on Scantronic 9827 after total power failure?
Mend alarm security system

How can I reset a Scantronic 9427?
Mend security alarm tamper

Tamper won't go off?
Mend phone number company

How can I upgrade my Scantronic 9827 home alarm?
Mend house alarm scantronic keypad

How can I send house alarm?
Mend scantronic alarm battery

How can I stop beeping?

Other models...

Scantronic 4600Scantronic 500rScantronic 500r+Scantronic 9000Scantronic 9100Scantronic 9200Scantronic 9425Scantronic 9448+Scantronic 9448ESScantronic 9450Scantronic 9452Scantronic 9454Scantronic 9600Scantronic 9651Scantronic 9751Scantronic 9752Scantronic 9800Scantronic 9800+Scantronic 9827Scantronic 9930

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Mend Security Systems, Home Alarm Systems
Mend repair fix Scantronic 9448 home alarm systems