Need advice on fixing feed dogs?

Thank you for your help Ken, after advice elsewhere about unsiezing the feed dog I have discovered it definitely is the stitch length dial not working.

regards
Erin

Erin
November 2007

Hello erin.
The reason the teeth are only moving up and down is because the dial for the stitch length is set too low, you need to look inside the machine near the stitch length dial to see if anything has come loose, take the top of the machine off or the side and see if anything has broken away, if it is not something simple unfortunately you will have to take that machine in for repair, it is not something I could talk you through unfortunately.
drivewithken@blueyonder.co.uk
Ken

drivewithken@blueyonder.co.uk
November 2007