Recent: Safely remove screen protector from a Macbook Air?

Mend > Home Alarm Systems

Mend Scantronic 9448 Alarm Tamper Fault

Replacing battery on Scantronic 9448 system?

During a recent power-cut the alarm system failed with a tamper fault. the key-pad wasn't illuminated and I wasn't able to enter my code to silence. The battery failed which wasn't a surpise as it was about 6 years old.

I've now replaced the battery but the problem I have is the Tamper light is permanently on and I can't clear it. This has been the case since the failure.

What I am trying to avoid is re-setting back to factory settings and having to re-programme. Any help will be appreciated.

Thanks
Tony

Tony
October 2007
ScantronicScantronic 9448Security Systems, Home Alarm SystemsAlarm Tamper Fault
try linking out the tamper circuit on the pcb for the bell ov and tr. if this clears the tamper then it may be the bell battery or the cabling itself although a power cut would cause a cable fault. also make sure the lid tamper switch on the main panel is located properly and that you can hear it click when you close the box - good luck. Failing this call gardiner security 0208 699 9900 and ask for scantronics tel no then choose tech support

Paul - security installer
October 2007
try linking out the tamper circuit on the pcb for the bell ov and tr. if this clears the tamper then it may be the bell battery or the cabling itself although a power cut would cause a cable fault. also make sure the lid tamper switch on the main panel is located properly and that you can hear it click when you close the box - good luck. Failing this call gardiner security 0208 699 9900 and ask for scantronics tel no then choose tech support

Paul - security installer
October 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Alarm Tamper Fault

Related Questions ...

Mend tamper power alarm
2

Tamper Light?

Hi the power went off and when restored I the tamper light has stayed on I cannot set the alarm, I have tried ... [Read more]
Mend alarm panel connections
1

alarm panel tamper connections?

hi, I have a tamper fault on my panel on the bell connections. (other tampers proven ok) how do I bypass the ... [Read more]
Mend fault alarm keypad reset
2

Tamper fault? ?

Hi there I have an c&k securitech 700L alarm, I've recently started getting a tamper fault that comes and goes... [Read more]
Mend alarm fault fitted
2

Nexus 8 alarm system - constant bell tamper fault?

My neighbour's home was burgled and the Nexus 8 alarm, which I fitted years ago, activated. Burglars smashed t... [Read more]
Mend tamper alarm showing
3

How can i get rid of BELL TAMPER message on home alarm?

Hi guys, this is my first time on a forum like this. Our home alarm is showing a BELL TAMPER message so I can... [Read more]
Mend scantronic reset showing
1

how to fix scantronic 9751 K01 Tamper reset?

hi guys, cant seem to reset my Scantronic 9751 system it keeps showing K01 Tamper reset no matter how many tim... [Read more]
Mend bell alarm ringing
5

Replacing vented bell box ?

Hi. Can anyone give me a make of a good bell box, alarm was ringing last night eith tamper fault noticed this ... [Read more]
Mend alarm panel tamper
1

texecom tamper light on when intheory should be off?

I have texecom alarm 8 zone with tamper fault,its a texecom panel connected to texecom SAB reading deep into ... [Read more]
Mend security tamper battery
1

How to remove lid tamper fault on my 9561 alarm?

I have had to replace the battery and now I cannot remove the lid tamper fault.
Mend tamper fault alarm panel
11

Scantronic 9600 tamper fault ?

Hi all, I have a tamper fault on a scantronic 9600 Alarm panel, I can't find the tamper connections on the pan... [Read more]
Mend How to mend it?
6

Con man offering paid incorrect info?

Hey guys just had this link mailed to me,just bear in mind this poor sod is paying/paid for this info. As y... [Read more]
Mend alarm reset reason
3

Captiv8 alarm?

What is "ZEX TAMPER"? This message along with "ENGINEER RESET" is now being displayed on our keypad. I have ... [Read more]
Mend security system fault
7

scantronic 9452?

Internal alarm keeps sounding. was working fine until last week, however now keeps sounding. I have replaced... [Read more]
Mend optima battery power
3

Optima help?

Thanks for the help i had in my last visit here regarding a battery replacement. I have replaced it today but... [Read more]
Mend alarm system control panel tamper fault
17

9751 alarm with tamper fault?

Folks, I have inheritted an alarm system with the purchase of a new house. It's a Watson Alarm system but i... [Read more]
Mend security alarm tamper

Tamper won't go off?
Mend alarm security system home security

Scantronic 9651 alarm?
Mend alarm security system battery

Scantronic 9427 Alarm?
Mend smoke security system

Reset system after smoke alarm sounds & user manual request?
Mend alarm scantronic reading

Alarm?
Mend system reset scantronic power

SR system reset on Scantronic 9827 after total power failure?
Mend alarm security system

How can I reset a Scantronic 9427?
Mend phone number company

How can I upgrade my Scantronic 9827 home alarm?
Mend security system scantronic

Disable Alarm Scantronic 9800?
Mend scantronic alarm battery

How can I stop beeping?
Mend house alarm scantronic keypad

How can I send house alarm?
Mend alarm panel home alarm scantronic

House alarm Scantronic 9427?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Other models...

Scantronic 4600Scantronic 500rScantronic 500r+Scantronic 808Scantronic 816Scantronic 9000Scantronic 9100Scantronic 9200Scantronic 9425Scantronic 9427Scantronic 9448ESScantronic 9449Scantronic 9450Scantronic 9452Scantronic 9454Scantronic 9751Scantronic 9752Scantronic 9800+Scantronic 9827Scantronic I-on 16

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Topic

Scantronic 9448 Tamper Fault - Battery Replacement