Recent: McCulloch gladiator 550?

Mend Potterton Kingfisher Home Heating Systems

Mend Heating, Home Heating Systems
Find out how to mend it for free.

Ask Question
Mend Heating, Home Heating Systems
Find out how to mend Potterton Kingfisher home heating systems

Mend > Home Heating Systems

Mend Heating, Home Heating Systems

I need to service and rectify a fault my Potterton Kingfisher boiler?

Please read and help me to service my boiler. Thanks
Boiler = Potterton Kingfisher
Potterton No. = 559045/1084
Serial No on Fluehood = G02 014081 LR
Control Unit = Honeywell, Type = V 4600 C 1029 2

The boiler operates normally, it comes on by the timer and heat the water and goes off when the preset temprature is reached, next time it comes on when the water temprature has gone below the preset value there seem to be a blow of some sort strong enough to shake the boiler room's door and there is a smell of not properly burned gas but it operates as normal otherwise.
I could not find any gas leak and there is no smell when the boiler is off manually or by timer, the pilot is always on as normal and if I leave the boiler room's doors open there is no blow.
When I stood there watching it I saw the flame comming out of where the jets spray the gas into the burners for a second when it came on.
I cleaned inside the boiler and could not identify any problem.

Please help me. Thanks

Fash
April 2005
Jack,

Calling a qualified Corgi engineer to service the boiler and give me a certificate was the first thing I did. He who have been servicing the boiler foe the past six years came in, tested the gas fires, the hob, oven and the grill (separate units) and when he went round to do the boiler and I explained the fault symptoms he said he can't do it for the same price and that he will call me back with a quote, which he never did.
That was just an excuse to leave sweet, as he had travelled 20 miles to get here, had already tested all the other appliances, had to travel back 20 miles, when I asked him to rectify the fault and bill us for the extra work, he said "I can't do it today, I have to go back" and that he never called me back with a new quote.

As I am a qualified Electronic engineer and used to occasionally service boilers many years ago before having to be Corgi qualified to service gas appliances I decided to have a look at it myself.

This is not about money mate; I do not get paid anything extra for doing this and have to call someone in to issue our company with a certificate at the end of the job anyway.

The whole thing is about,

1, proving to my boss that I was right in judging that all the guy could do was to test appliances for gas leak and other safety matters and if all O.K. issue us with a certificate and that when it came to fault finding he didn't know where to start.

2, in two years time, if not sooner, they are going to separate the building in two residential houses and sell it, in which case they need two separate boilers and have to replace our massive cold water tank with two small ones and separate the hot and cold water pipes and the central heating accordingly, so it does not make sense to spend several thousand pounds on a new central heating boiler for just one winter.

Unfortunately we have a through away economy and specially when it gets to old stuff, unless you find a honest and knowledgeable engineer, most engineers turn to salesman and try to sell you a new unit to earn their commission. Even when I contacted Potterton to service the boiler they did the same.

If you want to help me by advising me what part to replace and how to rectify the fault I will be most grateful, otherwise thanks for answering the question and your sensible advise.

Fash
fshenassa@hotmail.com

Fash
May 2005
FIRST YOU NEED TO BE A QUALIFIED CORGI GAS ENGINEER BEFORE YOU START MESSING ABOUT WITH GAS APPLIANCES YOU KNOW LITTLE ABOUT. I SUGGEST YOU CALL IN A QUALIFIED EXPERT BEFORE YOU HAVE A SERIOUS INCIDENT- THIS TYPE OF BOILER HAS A FAULT ON IT AS IDENTIFIED BYTHE HSE. THE SYMPTOMS YOU EXPLAIN AND POSSIBLE CONSEQUENCES COULD MEAN LOSS OF MORE THAN A FEW POUNDS! IT COULD COST YOU YOUR LIFE , AND YOUR FAMILYS, AND YOUR PROPERTY- ( I KNOW THE FAULT THAT IS OCCURRING- IM A CORGI REGISTERED ENGINEER- BUT I WOULD NOT UNDER ANY CIRCUMSTANCES TELL YOU WHAT TO DO TO RECTIFY IT OR HOW TO FIX IT- GET PROFESSIONAL HELP -FAST. YOU COULD BE PROSECUTED UNDER THE GAS SAFETY ACT1984 IF THERE IS A SERIOUS MISHAP- AND END UP IN PRISON!!

JACK
April 2005
FIRST YOU NEED TO BE A QUALIFIED CORGI GAS ENGINEER BEFORE YOU START MESSING ABOUT WITH GAS APPLIANCES YOU KNOW LITTLE ABOUT. I SUGGEST YOU CALL IN A QUALIFIED EXPERT BEFORE YOU HAVE A SERIOUS INCIDENT- THIS TYPE OF BOILER HAS A FAULT ON IT AS IDENTIFIED BYTHE HSE. THE SYMPTOMS YOU EXPLAIN AND POSSIBLE CONSEQUENCES COULD MEAN LOSS OF MORE THAN A FEW POUNDS! IT COULD COST YOU YOUR LIFE , AND YOUR FAMILYS, AND YOUR PROPERTY- ( I KNOW THE FAULT THAT IS OCCURRING- IM A CORGI REGISTERED ENGINEER- BUT I WOULD NOT UNDER ANY CIRCUMSTANCES TELL YOU WHAT TO DO TO RECTIFY IT OR HOW TO FIX IT- GET PROFESSIONAL HELP -FAST. YOU COULD BE PROSECUTED UNDER THE DAS SAFETY ACT1984 IF THERE IS A SERIOUS MISHAP- AND END UP IN PRISON!!

JACK
April 2005

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Rectify Boiler Help

Mend Heating, Home Heating Systems
Find out how to mend Potterton Kingfisher home heating systems

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Heating, Home Heating Systems
Find out how to mend Potterton Kingfisher home heating systems