2.2 eco-tec petrol 16 V. Wireing loome was with the replacement engine. all plugs are on. Only one not connected, which is to do with electronic gear box switch. which my car doesn't have as the engine is a year newer. so can't wire this one up to nothing. everything worked with a emobiliser before engine removal, when key fob is swiped on steering columb red light goes off, telling me that the alarm is switched off, but no spark and fuel pump noise on egnition which tells me that the mobiliser is in shut down mode. Any Help Thanks
could change loome but not easy as the wires are all over the engine and that was bad enough first time at the moment my patience are alittle short as this car is takeing up most off my weekends abox of matches and agallon of petrol seems a beter option at the moment any one help as i,m pulling my hair out
terry
September 2007
The ECU is running the pump all the time the ignition is on because it's not recognising the sensor signals. Can you change the engine wiring loom for the one off the old engine?
Dann
September 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.