Just recently while running on my trademill, it suddenly stopped. At first I thought I pushed a stop button accidentally, so I started it again. But it only ran for few seconds and stopped itself again. I got off, and started it again. It ran for a few seconds and stopped itself again. I tightened and loosened the belt, touched every button on it, but nothing solved this BIG (to me) problem. The trademill I have is TX 5.0 RC. Can anyone p'se advice on what to do? Thank you
I had the same problem while repairing my treadmill(powertrek).i found there is a sensor near the motor but pointing towards the pully(your treadmill may measure the speed differently),this sensor measures speed.If this sensor has moved a little,so that it is unable to measure speed,the treadmill stops.On the other hand your treadmill may have a different problem altogether or measure speed in a different way.Goodluck
Bill
December 2007
i would have to see it but does it stop at the same time like every 5mins or every 10 mins or are we talking seconds. it sound like it could be a few things
lenny
September 2007
I have the same problem, but no solution. We have tried changing the fuse, reconnecting certain electrical outlets, etc. Still only runs for seconds and then stops. We are able to remove the red button and put it back on and it restarts again but same thing happens. If I figure it out, I will email. Sorry, I too need help
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix gym/fitness equipment.