I hit a rock and bent the blade. I replaced the blade. Now the mower won't start. It's hard to pull, and jerks as you pull it.
Murray mower/mulcher Sold a walmart
Model number 21678x92a
don't be loosening the bolts too much...torq to specs...also check to see if the crank is not bent to s___ on bottom of crank connection to blade... take off the cover off the flywheel and rotate to see if there is damage there as well as inspection of the shearpin...good luck.
raechel
August 2007
You might have put the bolt on to tight. have you tried loosing i?
matt
August 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lawn mowers.