Mend > Tumble Dryers

Am I the only one? - dodgy Hotpoint TDC32P?

TDC32P Any Ideas?

My TDC32P condenser keeps cutting out after a minute of running. It seems to run normally ie gets warm, rotates etc but keeps stopping for no apparent reason.
So far I've changed the thermostats and timer but don't know where to go next - can you help?

Also, anybody want to buy a 2nd hand timer? or know a good divorce lawyer!

Since I first asked my question somebody sugested that a thermal overload on the motor could be responsible. It always fails when it is supposed to change direction.
I'm confused and the Hotpoint Aquarius washer has failed again too!
If you can't answer this, do you know what is most likely to go wrong with my Hotpoint fridge, I'm sure that's next!

Dave Manchester
March 2005

Hotpoint Hotpoint TDC32P Household Appliances, Tumble Dryers Hotpoint Ideas Minute

no mine is doing the same. Change the relay switch.

Antonio
June 2007

The only other thing it could be is the start relay.
If you hold the start button in does the appliance keep going then stop when you release??
If so, you'll need a new relay which is found behind the front console in the middle.

hotpoint man
April 2005

Does the drum start slowly?? lots of humming??
If so, you'll probably need to replace the 7uF capacitor by the motor. it's like a big white or silver sherbert tube with wires coming out, usually just next to the motor.

hotpoint man
April 2005