how can I fix Triton Opal shower cutting out showing low pressure?
my shower, aprox 3 yrs old,runs hot for 2 minutes and then cuts out completely showing light for low water pressure. there appears to be ample water flowing through it, and this literally happened overnight- HELP!!
I had exactly the same problem. A plumber came over and it was surprisingly simple to resolve. If the shower power light is on, chances are that the flow of water is obstructed somewhere. In my case, it was a build up of limescale in the shower head. All I had to do was descale it and the shower started to work fine again.
Hope this helps.
Silvia, London
April 2009
sounds like you need a new PRD (cheap repair order from shower Doctor about £11..I ordered one today.
James
December 2007
I have the same problem and according to triton you should be able to remove the front cover (2 screws at top 1 at bottom) then loosen the compression fitting (copper pipe) that feeds the shower, apparently in there is a filter, if you clean it out with an old toothbrush and reconnect everything it should be fine...
Matt
August 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix baths and showers.