My bosch classixx WFO 2467GB/01 washing machine (2 weeks out of guarantee) has started to carry on filling up with water and then gets stuck on its program and won't spin even if I put it on the spin program. We have cleaned out various pipes in case the problem was limescale and it seemed to fix it the other night, but has started complaining again. The brushes on the motor are fine and we think the computer is fine. Does anyone have any ideas what this could be or if it is a limescale problem, where the blockage might be? Thanks in advance
Our worst fears have been realised, it is the computer :-( Sometimes you pull the short straw!
Emma Leigh
July 2007
Thanks. We checked it for leaks and there didn't appear to be any. We have also renewed the water regulator, but it wasn't that! We have now arranged someone to come and look at it tomorrow so will post the solution for future.
Emma Leigh
July 2007
hi, if it carries on filling up its either a tiny hole in your pressure pipe or the presure pipe is blocked, try pulling the pipe off and blowing down it, failing that take the pipe off and inspect it for holes, they can rub and wear a hole in the pipe so the machine doesnt know when to stop filling,
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.