Singer: Balance wheel and treadle problem?

Actually those instructions above worked, I just needed some practise. Apparently it's very easy to sew "backwards" if you're not completely familiar with the treadle technique. Thanks anyway for your quick answer!

Leena
July 2007

Ken wrote:
Hello Leena,
To get the treadle working the correct way spin the balance wheel towards you and then work the treadle and it will be fine,
Tell me what is happening with the thread, is it top or bottom problem, either e-mail me or put a new question in.
Ken


Yes, I have done that but as soon as I start to work the treadle it changes the direction or stops. I also found these instructions: "Loosen the balance wheel as described above, place both feet upon the treadle and turn the balance wheel over towards you, at the same time allowing the feet to move freely and lightly with the motion of the treadle. Continue to do this until a regular and easy movement is acquired and you are able to work the treadle so that you can re-start the machine without the balance wheel turning in the wrong direction." I guess I'm gonna try that or what do you think?

The thread gets tangled in the bottom, between the bobbin case and feed dog.

Leena
July 2007

Hello Leena,
To get the treadle working the correct way spin the balance wheel towards you and then work the treadle and it will be fine,
Tell me what is happening with the thread, is it top or bottom problem, either e-mail me or put a new question in.
Ken

drivewithken@blueyonder.co.uk
July 2007