my bolen 31 cc revs too high when idling?

I'm not exactly sure this will work for you,but it did work for me!

I used the principal as the same way you adjust the jet screws on a carburator of an old car!!!

Turn them both back to the starting position(just when they won't turn no more),then very slowly just turn each one a TINY,TINY,TINY bit,then stop and try to get it to run,after you turn them a tiny bit,then try it again,untill you finaly get it to run. If this doesn't work,you will have to find another solution!

Good luck and may GOD BLESS! MR> NEIL WILLIAMS

neil williams
July 2007