The unit displays CODE---- I know the security code but nothing happens when I press the first Pre set key three times to enter the first digit of the security code. Am I right in assuming a number should appear in the display corresponding to the number of times you hit the key.eg in this case the digit 3. or am I missing a step in the procedure.
1-Turn the ignition switch to "ACC" or "ON".2- Press the "PWR/VOL" knob once.The display will begin flashing the frequency"87.5". Then do one of the following:Wait about 4 minutes until the display begins flashing the word "CODE". -or- Press the "PWR/VOL" knob two times. The display will begin flashing the word "CODE". 3-With "CODE" flashing you press your preset 1 a sufficient number of times to represent the first digit of the code,press preset 2 a sufficient number of times to represent the second digit of your code,press preset 3 a sufficient number of times to represent the third digit of your code,press preset 4 a sufficient number of times to represent the fourth digit of your code. That should do it. Hope this helps
Sean M.
December 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cassette players.