Where can I get door latch for sensordry APM 8620?

Mark Scotts answer to the problem is simple to do you dont even have to take anything apart just bend out the spring and put a pin nail across the gap !!!!

Arch
October 2011

Great solution from Mark Scott - works a treat. Took forever to get it back together though! Not one for the cack-handed.

Nick Sharrock
December 2010

david c is correct. What I did was to insert a metal piece across the plastic that the spring sits on and that has worked great and will last as it will not break like the plastic.

mark scott
February 2010

i can get these catches you can contact me on 01283222614

brian
November 2009

I have the exact same problem! Is it a fault with the model perhaps?

Eleanor Rushbury
November 2008

I have exactly the same problem.....looks like it is a buy a new one but who makes this stuff?

Peter McCormack
June 2008

For anyone else who stumbles across this:

the door latch isn't the problem per se, it's the plastic frame of the door. One weak part of the door is meant to hold the spring of the door latch taught, and this will bend and brake given enough time. You need to get the whole white part of the door replaced. Don't know where to get this yet - still searching

David C.
May 2008

Read your Question You will find this site useful they have made videos on repairing your appliance

CUT AND PASTE THE LINK IN TO THE ADDRESS BAR

these videos are for information purposes only. A qualified and proficient engineer should be employed to replace any faulty parts on your domestic appliance.
Visit our shops for all your parts



http://www.Apart4u.com

http://www.Apart4u.co.uk

Di
June 2007