when i set the programme cycle eg. normal after about 2-3 mins the machine empties and finishes.when i open the machine the first 3 lights on the display are flashing and the 5th light is on permenantly.PLEASE HELP
I have been distraught waiting for an engineer to come and have a look at my dishwasher. I found this site, followed your instruction and BINGO!I have cancelled said engineer and I hail you as a hero.
Thanks sooooooooo much
Diane
October 2008
Can't believe this has worked. I prepared myself for needing to replace this dishwasher and searched the internet first to check what the LED lights meant. What I would say is once you turn on the switch you need to quickly press the button to get it to reset.
rick
July 2007
wahey!!!!
your a star! hate to think how much money you probably have saved me!!!
thanks a lot,
Dan
Dan
May 2007
Brilliant advice but you need to be patient. 10th time worked for me. Thank you so much.
Mel
June 2006
what a star many thanks ed thought i needed a new one then
cheers gary
gary
July 2005
Thankyou very much for this advice, we had the same problem and after trying this it is now all sorted - many many thanks !
Hazel
May 2005
Your timer needs reset. Switch off at the on off button. Now switch it on again and press the select button 4 times quickly. You should now see the left hand and right hand buttons lit. Press the select button once more and the left button will go out. Switch off at the on off button. When you next switch on it will work. If you do not get the lights in this order switch off and try again.
howtomendit.com for free repair help, information and advice.
