Recent: Home max fs506x?

Mend > Lorries/Trucks

Mend 811 Problem Replacing Ideas

problem with powersteering cargo 811?

after replacing the p steering pipe and pump, the steering is still heavy. any ideas? lynn

lynn
June 2007
there is a joint in the steering coloum check that is not seized up. disconect the joint off the steering pump if steering is still stiff thats your problem.

peter
August 2007
1. check your tyre pressures. Ideally 90 - 100 psi
2. make sure the universal joints on the steering column are all free and moving.
3. ensure the stubs are free moving and well greased, this is probably the most likely problem.

Joe
June 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Problem Replacing Ideas

Related Questions ...

Mend motor performance fmtc
1

Table saw not running and motor sparking?

Performance (B&Q second hand) 254mm table saw FMTC 10TC Was working well, cutting bitumen encrusted bottom ... [Read more]
Mend Aprilia RS 125 Electrical
1

aprilia rs 125 2008 fp 20amp fuse problem?

any ideas greatly appreciated, rode my bike 500 yards up the road and all the electrics died and the engine, n... [Read more]
Mend boiler central heating programmer
2

Potterton Programmer not controlling stat?

I developed a fault on my Potterton system as a direct result of trying to change the in room stat (Potterton ... [Read more]
Mend washer leaking drain pump
1

Why is my Fisher Paykel washer leaking after replacing the drain pump?

I had a bad drain pump on my Fisher Paykel GWL15 washer. Thanks to the internet, I was able to replace it mys... [Read more]
Mend washing machine leak pump
5

how can i fix my fisher paykel gwl15?

Initially my washer (Fisher paykel gwl15) was leaking water so we set it on cinder blocks to see where the lea... [Read more]
Mend golf electric battery
1

VW Golf Electric Window/Central Locking/Battery Drain?

Hi there, I have a VW Golf Mk4 (2000) which has an electrical problem which is really beginning to annoy me... [Read more]
Mend peugeot car garage
2

peugeot 307 hdi keeps cutting out?

my car has been in the garage now for 3 weeks cant find whats wrong with it ur just driving along then anti po... [Read more]
Mend boiler heating electrode
1

boiler needs up to 10 tries before firing properly. Why?

potterton profile 80e problem ---- boiler has between 6 and 10 tries at igniting before it bursts into li... [Read more]
Mend diesel power driving
1

Nissan X-Trail 2 Ltr Diesel 2009 Lack of Power?

My 2009 XTrail has an intermittent problem - after driving from cold after about 20 miles or so, you lose powe... [Read more]
Mend motor will not turn
1

Ultima 65 motor will not turn?

I have replaced the PCB, transformer, and the motor and still get nothing. This is one of 2 that had a similar... [Read more]
Mend overheating thermostat element
2

What is wrong with my Baumatic cooker?

Hi there, I've just replaced the element in my Baumatic oven because it was burnt out but now when i turn the... [Read more]
Mend electric fault bought
7

Ford Focus Mk1 - Drivers side electric window fault?

Hi, I bought a Focus over the weekend and I was aware that the window was not working, I assumed it would be a... [Read more]
Mend tapping noise problem
3

tapping noise vetra c?

i have a vectra c 03, runs fine and smooth. the only problem is when you press the clutch it makes a tapping n... [Read more]
Mend upper spray machine
1

F&P NEMO upper spray arm not spinning?

it is 3 years old. The machine has always delivered a very poor quality wash (day 1) especially the upper rack... [Read more]
Mend heating thermocouple boiler
1

myson boiler?

I have aked aquestion earlier on about my mson apollo boiler, ihave problems with it lately i have resolved ac... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Lorries/Trucks ...