my dishwasher stops and flashes up door on the screen and wont start again do u no what it is?
steve
November 2012
Can anyone help with the fault code ALO8? I can't seem to get my new dishwasher to work properly.
Karen
March 2009
For al03 or a03 error see here
http://www.howtomendit.com/answers.php?id=13831
Very helpful page.
Ali
December 2008
al03 means something is caught in the main wash pump motor pump. Drain the machine. manually empty the interior water reservoir with a cup/cloth. turn the power off, take the bottom off the machine, look for the pump, remove the circular clamp, remove the obstruction & rewind process & restart.
j drake
May 2008
I have had an AL03 code - in my case it meant that there was an obstruction to the water outflow into the drainage pipe under the sink. The connector that connected the outpipe to the sink drainage contained a small anti-return valve, which isn'treally needed. My handyman removed the valve, and all was well after.
Now, 18 months later, my machine is showing an AL10 code. Rats.
Geoff Penn
July 2007
I don't know about you but mine is giving me a AL 03 and it's not mentioned in the trouble shooting book. :/
Richard Harrison
June 2007
what does al03 mean is the dishwasher connected to the hot or cold supply on dwf07.
john richardson
April 2007
On my FDW80 this code accompanied by the smell of burning meant the heater element was US. I replaced it with one from my local appliance spares shop for £40. It is simple to change but you do need to buy some jubilee clips before you start the job. I am told that you can run the machine with the right side off to check for leaks afterwards. I wish I had as the drain clip leaked slightly and caused an AL01 code!
Niall G
January 2006
I have seen this elsewhere as I look for another error code. AL10 means that the heating element needs replacing - generally by the service engineer.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.