Mend > Toilets

How do I get the lid off my Roca dual flush toilet's cistern?

The cistern leaks into the pan but I cannot get the lid off

Kevin
May 2007

I have Roca which has a leak but not all the time ,But I cant remove the lid to see if its overfilling, There must be an easer way then prizing the flush button as it not working for me

Ron
June 2022

Anyone know how to get the single button one off?

Enigma
September 2015

That was helpful!! Push the small round button remove the crescent shape button with a screw driver and then you'll find another screw + shaped and after that you can remove the lid

Aat
February 2014

See this link: http://youtu.be/t7em5EpzCQQ
Press down the smaller button, use a screw flat head driver prise up the bigger button. Then remove both buttons and unscrew inside. And now u can lift up the cover!

JuzChris
December 2013

Can anyone plz explain me how to open the lid of roca dual flush toilet's cistern I tried doing it one way or another but I just can't get that thing open.... I even tried to pull off the buttons as mentioned above but it didn't work.... Is there any other possible way to get the lid open?

Cindy
May 2013

Sarah i had the same problem and it works.some times it just the two sticks that are inside just get blocked.no need to take full cover off

Lee
January 2011

Does anyone happen to know how to remove the lid off the Roca single flush cistern? (one chrome button) - I cannot work it out :)

Thanks

V
March 2010

you push in one side of the flush button then pull out the other this reveals a screw which you undo and take out. We have had the same problem with all our roca toilets the grey washer at the bottom needs replacing it costs @ £1.50 dont let the plumber tell you otherwise. I phoned roca and they sent me some handy leaflets on how to change the washer. Not great design though is it?

sarah
July 2007

If it is the same type as mine, you prise up the two buttons with a small blade screw driver. When they are far enought out to grip you can pull them out. Then use a cross head screw driver and remove the screw in the centre of the button holder. You can then remove the button holder and the top.

BJJ
June 2007

Push one of the buttons down until it meets resistance, then whilst it's still down push against the inside of the other button and pull it out. Then let the first button go and pull it out.

Underneath you'll see a screw head or a bolt head - unscrew and then the flange can be removed, allowing you to remove the lid.

Halli
June 2007