how do I clear a code?? Panasonic Panafax DX-2000 super g-3?

1. Remove the toner cartridge and close door back up.
2. Power down the fax (switch is on the back side lower left) for 5-10 seconds.
3. Power on the fax and see if the 021 code is gone.
4. Re-insert the toner cartridge.

If this did not work, you can try resetting the fuser from the hidden service menu.

RE-SETTING THE FUSER

1. Push the function button
2. Push 7 on the key pad
3. Push Monitor button 4 times (it will only beep at you)
4. Push * on key pad

You should now see the service menu option

5. Push 7 on the key pad
6. Push "Set" button
7. Push down arrow button once

You should now see the fuser reset option

8. Push "Set" button

You will be prompted for 1 for Yes 2 for no

9. Push 1 on key pad.

You should receive confirmation that the reset is *COMPLETE*

10. Push Stop button until back to the main screen

11. Power down the fax
12. Wait 5-10 seconds.
13. Power on the fax (and cross fingers)
GOOD LUCK

ILAN
May 2007