How can I fix my Sportcraft treadmill tx4.9?

My Sportcraft treadmill tx4.9 keeps reading all 8's on the control board preventing it from working...what is the problem?

Telisa Yates
May 2007

My TX4.9 starts but after 10 seconds stops and shows a 3 on the control board. How do I fix this?

Terry
June 2012

You can't, they are all junk. Soon as one problem is fixed I garuantee you will have another one. DO NOT BUY ONE

Corey
June 2011

TX4.9 treadmill read 3 on the control board and stop.

Sahra
December 2010

treadmill starts and then stops

JOHNNY
July 2010

my sportscraft treadmill tx4.9 reads a 7 on the calorie section and will not run -

fran mich
April 2010

I need a control board for my sportscraft tx4.9

Jeff Mann
February 2010

i need a control panel for a york 3100 treadmill were can i get 1 ?

john
August 2009

my treadmill working only 7 sec. and stops .What can i do to fix it?

natalie zambrano
May 2009

Hold down stop&mode (at the same time) while removing the safety key then re-insert the safety key and it should reset it.

kristen
February 2009

I have the same problem as above... Speed just reads 7

Sam
January 2009

mi sportcraft tx 4.9 reads 7 on the control board

charo
October 2008

THROW IT AWAY BUY YOU A NEW ONE

RICO
September 2008

Treadmill?

Is there anywhere i can find a motor control board for my sportcraft tx4.9 ?

What's wrong with my Sportcraft TX 4.9 treadmill?

need speed sensor wheel?

How can i fix my tx400 sportcraft treadmill model #04040?

My treadmill stops when it hits 3 and will not go. Do not know what to do?

Why does my Sportcraft Tx 4.9 run slowly?

My tx4.9 sportcraft treadmill has power but wont run just has a 7 in the ca?

tx335?

What can i do to fix it the number 3 show up?

remplacer l'aimant démareur,(rouge.)?

I have a sportcraft TX 550 treadmil that stops working after 8 sec ?

Mend Sportcraft Gym/Fitness Equipment