Power cord on Kenmore Whispertone 12.0 amp Carousel Cleaning?

There are 4 phillips screws that hold the housing over the motor. Two are under the hinges that swing the bag cover open. Lift up the bag cover housing and look next to the base of the hinge.

The other two screws are located under the spring-loaded gray plastic pedal for the cord release. Pop this off by prying a flat-head screwdriver between the case and the pedal (on the ends). At the same time, there are 4 tabs along the back side of the pedal connecting it to the housing. Release each tab gently with the screwdriver while pulling the pedal and it should eventually pop out.

Tip over and four screws should fall out and your housing cover will lift right off giving you easy access to the power cord wheel.

Steve
July 2007