Recent: 1999 Renault Megane Fuel Pump Location Guide

Mend > Tumble Dryers

Mend Hotpoint TDC32P Dryer Heating Thermal

hotpoint aquaries tdc32p tumble dryer?

dryer does not heat up.
heater element and thermal switches have been replaced

peter h
May 2007
I have the same problem. Dryer works as normal but without any heat. There are three thermal switches - two at the back and one in the door - these check out ok on my machine. The heating elements are fine. I suspect that I need a new timer. I have held back because I have a coprecci timer but could only find an invensys timer spare.

Does anyone know how easy it is to swap between the two makes?

M Scott
May 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Dryer Heating Thermal

Related Questions ...

Mend drying aeg machine
1

Not drying correctly AEG Lavatherm 37320 Electronic vented tumble dryer?

Machine operation seems normal but not drying correctly even after long period of operation. It has good warm... [Read more]
Mend bosch dryer heating element
1

Bosch Dryer not heating?

I have a Bosch WTMC 6300US and it is not heating. Earlier I cleaned out the area below the lint filter with a... [Read more]
Mend tumble dryer not heating element
1

Beko DRCS68W TUMBLE DRYER NOT HEATING, ?

MY Beko DRCS68W Tumble dryer is not heating i took the element outer cover off and noticed the element glows... [Read more]
Mend zanussi dryer heating element
2

Wiring diagram for a Zanussi ZDC5350W Dryer?

I am after a wiring diagram for the ZDC5350W Condenser Dryer. It's not drying properly and I suspect either th... [Read more]
Mend wher e cut out dryer
1

wher e is the thermal cut out fuse in the zanussi tc7102w dryer?

my tumble dryer is not heating up could you tell me where the thermal cut out fuse is located i would like to ... [Read more]
Mend tumble dryer drum
3

Diplomat apm 8620?

I have this tumble dryer. The drum turns, but it is not heating. The thermal cutout switch on the rear is fine... [Read more]
Mend tumble thermal fuse
1

Hoover TC650 heating element stays on when you stop the dryer ?

Hi Can anyone help me my TC650 dryer is having problems ! First of all there was a smell of burning and then ... [Read more]
Mend broke heating element
1

CREDA CDV262UK stats?

Hi there, i have figured out one of my stats on my tumble dryer is broke. It is situated on the heating elemen... [Read more]
Mend dryer gas ignitor
2

Kenmore dryer model 11072822101 not heating?

My dryer has no heat. I do have gas to the unit. Is it the following: 1. Gas Valve coil? 2. Thermal fuse? I... [Read more]
Mend tumble dryer heating repair
1

my creda tcr13 tumble dryer is not heating?

I replaced the thermal cut outs but still not heating.
Mend heating turned works
1

Gas dryer has quit heating?

the gas is turned on and everything works but the heating process. I'm guessing the ignitor has gone bad or... [Read more]
Mend dryer heating fuse
1

Maytag dryer won't start - pye3300?

I moved about 3 weeks ago and had to change the plug. (from 4 to 3 wire) One load later it wouldn't heat. I r... [Read more]
Mend dryer zanussi overheating
1

Zanussi TD520 Tumble Dryer is cutting out before end of cycle?

The machine cuts out towards the end of the cycle, almost as if it is over heating. Is there a thermal cut ou... [Read more]
Mend heater thermal elements
1

Proline TDC6A not heating, heater elemants are ok?

Dryer not heating, elements are ok is there a thermal cutout / fuse and where is it on machine. If so how do y... [Read more]
Mend tumble dryer no heat thermal cut out
1

No heat from dryer ?

Is there a thermal cut out switch on the thermostats to stop the elements from heating the TDC62 model if it o... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Tumble Dryers ...