HOOVER 5050ED tumble dryer instructions?

How to stop all lights flashing

To
July 2021

My tumble dryer works great, but there is no lights on except for one light which is on normal program.
So l don't no what time it's set for.
Pretty sure it doesn't turn off.

Tom
July 2016

Looking for working instruction and other Q is heater is working but not drying clothes is it themostrart faulty or am doing some thing else

Sud
September 2014

I just bought a hoover 5050ed of a mate of mine for $50.00 dollars and it works really well, the only problem is that they had lost the manual, but I followed the instructions that Vicky has given, I also looked on ebay for one but to no avail...but thanks Vicky, I wondered why the time duration lights were not aluminating.

Shane
September 2014

I have front panel responding with red lights & tumbling on my hoover 5050 ED dryer. I have checked rear element which looks fine but get no heat?Can you help

BILLIE
July 2014

yes

mark
November 2010

I switch the clothes dryer on but any goes for a minute or so and switches off

Val Bird
August 2010

we have been given a hoover 5050ed auto dry plus clothes dryer . it appears that the heating element is not working as there is no hot air coming out of the back exhaust only cold air . is this right or does the dryer sense the wetness of the wash load and automatically adjust the drying temperature . it does not have a temperature setting on the front as well .there is no heat at all inside or outside of this dryer .

mal whitfield
May 2010

as above but don't forget to press the handle button on the door after you've made your settings - this starts it

Matt Aus
March 2010

You can set your dryer to dry clothes automatically.

Just press start and it will dry on the normal temperature until it senses that the clothes are dry.

If it keeps stopping, it means it thinks your load of drying is dry. Check the load and take out any dry clothes before continuing the auto dry.

If you are still unhappy with the auto dry, you can manually select a drying temperature and duration. Press Manual, and press Select until your desired temperature is lit, then press Accept. Then press Select to move the duration, then press Accept once happy with it. Then you can press start and your dryer will carry out those instructions.

Vicky
June 2007