Easy fix!!!
The wiring design on these is poor. I have the D-62 series and had the same problem. When a speaker wire is inserted into the terminals on the back, some wires can break off inside the unit and they short out on the inductors (just coils of wire) on the circuit board.
If you remove all the screws on the sides and rear of the unit, take the cover off, and trace from the speaker terminals to the inside of the unit, find the piece(s) of wire and pull them out. Might need to use tweasers.
reassemble the cover and screws and it will work like new!!!
good luck! Email me if you still need help
sewellp@yahoo.com
Patrick Sewell
January 2008