Why will my Triton Bezique shower only produce cold water and no hot?
My Triton Bezique elctric shower will not produce any hot water even if you leave it running for ages. It will only run cold water. The light will sometimes flick on to the hot water but immediately flick back to low pressure and continue with running cold water. Any help appreciated.
This Problem has been bugging me for While now.
Fix this problem for less than £1.00.
You will most likely find that capacitor C3 has Failed. It is a 100nf rated at 275v. These are available from RS (148-474) or Farnell for around £0.35 each. If you are handy with a soldering Iron, remove the PCB and replace the capacitor.
Job Done.
Dave from Huntingdon.
April 2012
mine had same problem.turned out to be the pcb control panel repaired under warranty by triton,part around £50-£60
Chaddy
January 2009
did you resolve this prolem if so HOW?
marc chadwick
November 2008
if its going on to low pressure try cleaning your shower head, run without head connected. or your gauze filter in mains water pipe clogged up. and test your heating element may be on its last legs. need a electrical tester for that.
hi-spec plumbing
March 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix baths and showers.