remove top steering column cowl [held on by two torx screws] disconnect both wiring plugs [both plugs sort of hook in] remove single posi drive screw holding switch in and slide switch upwards. dont forget to swop over flasher unit to new switch.refit in reverse order.
keith
February 2007
their are 2 screws holding them in place you have to take the casing off first then ou will see the screws the plugs will clip out.
gerry
February 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
