1 wemove road wheel
2 disconect hub from bottum arm /steering joint/ suspention.leg
3 remove the large hub nut from middle of hub about 30mm
4 disconect brake calliper from hub
5 remove hub by knocking the drive shaft from the middle
6 you now remove the hub bearing by pressing it out 1st remove c clip through the back of the hub
7 re-fit is the reverse
Tony
January 2005
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.