I Have a McCulloch 3200 chainsaw whose fuel line just rotted out. I have the new fuel line but need to verify the connections from fuel feed to primer ball, primer to carb, carb to fuel tank. Anyone help?
Sean's answer is the one to follow. Just finished a re-plum with nothing to go by as all lines were missing. Runs great-------------
Bruce Poughkeepsie,NY
March 2016
I have a diagram in word format I can email anyone.
T-man
May 2015
how do you get the bottom hose in the hole far enough so the saw doesn't leak fuel. is the hose size 1/8 - 3/32?
Frank
September 2014
Is there an easy way to replace the fuel lines?
Armando
June 2012
Also the bottom line from the tank to the right side of the carb is the one that has the fuel filter on it.
Sean Harrison
October 2007
Also the bottom line from the tank to the right side of the carb is the one that has the fuel filter on it.
Sean Harrison
October 2007
From the tank on the top hole run a fuel line to the long nipple on the primer bulb, from the short nipple on the primer bulb to the carb to the nipple under the choke lever. From the bottom hole on the tank to the other side of the carb. Hope this helps.
Sean
928 Equipment Sales & Service
Lake Havasu City Az 86404
(928)855-2788
Sean Harrison
October 2007
I just discovered the same thing and too cannot locate any help. I am going to give it a try and see what I find. One thing I know is 2 lines go into the fuel tank. One has a small filter on it and this goes to the side of the carb where the adjusters go. Theother goes from the carb to the tank I believe. the rest I am going to figure out.
Bill
April 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
