how can i fix my dishwasher, indesit, d63?

Also check that the seal around the Salt cover is tight some time when refilling with salt it slacens as you unsrew the salt cap allowing water to pour in usealley resulting in tripping your pcb

Rob
May 2009

This worked for me and saved me a call-out bill

Jack
February 2005

Water has got into the very base of the machine & lifted the the flood switch float. Pull the appliance out & tip it back at 45 degrees until any water comes out from underneath for a couple of mins then set it back down & try it. Sometimes its a one off fault but if it happens again check your filters are clean as this restricts the flow and causes it to overfill.

taff
January 2005