My frg-120d screen was blank because there was a solder crack on the ribbon cable connector on the main pcb board. The cracking could be seen with a x10 lens and good lighting. The solder can be 'repaired' by remelting it with a hot soldering iron and preferably a little flux.
Normally solder cracking occurs on hot components, but here I think the ribbon cable was too short and was pulling on the connector.
D Empson
March 2022
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix audio systems.