I have a Bosch WFL2260 that fills and drains perfectly, but does not spin. I've cleaned the pressure hose out going from the drum to the outlet manifold at the rear of the machine (It was cull of gunk and slime) but still no luck. Is their a pressure switch that needs re-setting? How can I check if the brushes need renewing? Any help or advise would be appreciated.
hi chip needs brushes on the motor,remove the motor and the brushes are fastened to the back of it by some screws undo and pull them out they should have about 30cm of black brush on them if not replace
howtomendit.com for free repair help, information and advice.
