Recent: Home max fs506x?

Mend > General D.I.Y

Mend Generac 1536-1 Oil Amount Pump

what is the oil capacity?

I would like to know the amount of oil/capacity of a Generac
1536-1 high pressure pump. It is a 2100 psi , type 4200 cp,
2.0 gal/min. This pump has no eye glass to see the level,
and no drain or set screw to watch oil run out when filled properly. The hole on top of the pump allows for the mating of the engine shaft to the pump. This hole is the only way to get oil in the pump. I don't want to over fill the pump to any help on how much oil goes into the pump would be greatly appreciated.

Butch Fitzgerald
May 2016
First Thanks for the heads up on Google, never used it before always used yahoo on searches.
Second The owners manual searched on google was updated and had the type of oil used as well as the amount . I was going to use the same oil as one used in a video which was a non detergent 30w. The updated manual called for 80w-90.
quite a difference. Sorry I tried your patience !!!

Butch
June 2016
Why didn't you bother with a simple Google search?

Forgive me but I get really hacked off that people seem unable to raise a finger to help themselves. Literally 30 seconds was all it took to find an exploded diagram, owners manual and a figure of 140 ml (See page 11).

http://www.ppe-pressure-washer-parts.com/generac-pressure-washer-model-1536-1-parts

Anon
May 2016

Automatic Answer

We may have found other answers which could help you.

Click here for Oil Amount Pump

Related Questions ...

Mend oil burner installed
1

Riello mectron 3m oil burner leak?

I have a Riello 3m oil burner installed on a Burnham Jubilee furnance. The Riello burner has developed a small... [Read more]
Mend burner oil ignition
1

Riello burner needs reset to start?

Can the amount of time the Riello 40 F5 burner pumps the oil before ignition attempted be increased? We have a... [Read more]
Mend chainsaw oil pump ryobi
7

ryobi oil pump?

my ryobi chainsaw does not use the recommended amount of oil. very little is coming out of the supply hole. co... [Read more]
Mend stop lawn mower
1

How to stop my Lawn mower from stalling?

I can get it to start but have to continue to "pump" gas through the prime bulb. It runs very rough and chokes... [Read more]
Mend boiler central heating sludge
1

Potterton Profile 30E keeps tripping on Central Heating?

My Potterton Profile 30E keeps tripping off and requires the reset button to be pressed to restart. This typic... [Read more]
Mend oil leak out exhaust
3

oil leak out the exhaust?

my yamaha waverunner is not running to good. and it also leaks a fair amount of oil out the exhaust while it i... [Read more]
Mend intake valve pump
9

94 Isuzu Diesel Blowing white smoke?

Hi all, I have a 94 Isuzu Bighorn 3.1L turbo diesel. I have a good knowledge of petrol engine but this is ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend General D.I.Y ...