Recent: Home max fs506x?

Mend > Blenders/Mixers

Mend Replaced Wont Turn

replaced brush wont turn on?

my mixer wouldn't turn on so we checked the brushes and one of them was broken. Got new parts in today and replaced the old ones and still nothing!!! checked the board and everything looks good. What could be wrong? only had the mixer for a year and i can count the number of times i have used it

Fay
March 2016
the only thing that causes carbon brushes to break is one segment of the armature has lifted and snaps brushes
check the armature for a lifted segment

gts
March 2016
What could be wrong is that the motor is burnt out - which is to say when the brush broke the armature may have become jammed fast so that full current acted on one or two windings for a much longer period than would normally happen with a rotating armature.

This is my guess for what could be wrong.

Good Luck...
March 2016

Automatic Answer

We may have found other answers which could help you.

Click here for Replaced Wont Turn

Related Questions ...

Mend start ride switch
1

Cannot start my Hayter 13/30 ride on mower?

Cannot start my Hayter 13/30 ride on mower. All of a sudden it won't start. I replaced the plugs and ignition ... [Read more]
Mend heating matrix pipes
1

206 pug heating matrix?

Ive reacently had my aircon regased and the pipes that were perished replaced and now the heater wont turn on ... [Read more]
Mend combi pressure temperature
1

Arriston combi boiler hot water scalding temp light comes on?

high temp light comes on, boiler cuts out, click reset button works fine.. then cuts out few mins later. bar p... [Read more]
Mend washing machine motor error code
3

ZWF1217W motor?

Faulty door lock replaced following an error code and the machine cycles through the programme ok however the ... [Read more]
Mend washing machine repair motor
1

how can i fix my Beko wm540 machine?

how can i fix my Beko washing machine as the drum wont turn round at all, the belt is not worn or slack, weve ... [Read more]
Mend refrigerator temperature control thermostat
1

Thermostat wiring? ( Westinghouse RP429F)?

Hi replaced the thermostat in my fridge my problem is the old one was a Ranco the new one is a Danfoss. There... [Read more]
Mend How to mend it?
1

transit dual mass conversion wont engage?

when i replaced my dual mass with the single mass on my 2000 rwd transit the clutch will not "bite". it jus... [Read more]
Mend turn key paul
1

starter motor?

replaced starter motor , wont turn over by key , but will turn over when put screwdriver accross starter turmi... [Read more]
Mend How to mend it?
1

Starting issues?

I have a 5.9cc dodge camper.If i dont turn it over for a length of time it takes ages to start.However it was ... [Read more]
Mend light turn yellow
4

sagem htd501 tv?

The standby red light comes on when i turn the tv on it then turns to a flashing yellow light but then instead... [Read more]
Mend light lamp turn
1

Infocus 777 comes on wont project light?

I have replaced the lamp but when I turn the projector on the Blue Infocus light comes on the back light flash... [Read more]
Mend ford focus replaced
1

how can i fix my car when it wont crank - ford focus 08?

I Have a ford focus year 08. it wont crank ever since i busted my oil pan . i have replaced the oil pan. The m... [Read more]
Mend ldv convoy motor
1

ldv convoy not turning over?

ldv convoy 2.5td 1998 model.when trying to start van starter motor solenoid clicks. replaced starter motor wit... [Read more]
Mend Peugeot Petrol Battery
2

car will turn but not start?

hi there i have a peugeot 206 T reg that had run out of petrol whilst driving, i had filled the tank with £20... [Read more]
Mend start 1999 starting
1

vw diesel wont start?

I have a 1999 VW beetle TDI had a problem with it not starting found anti shudder valve sticking cleaned it I... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Blenders/Mixers ...