Machine is about 6 years old - first real problem. This morning put on a wash cycle, water flows, clicks are heard (probably solenoids or whatever) but nothing else. Just sits there with the main wash, short wash & start lights on (no flashing). Turn it to one of the drain cycles and the water is pumped out but the drum does not spin. Have removed the top and all electrical/water connections are secure, the belt is OK and no sign of any other problems. The only previous hint of something odd was that towards the end of a wash cycle the would be a slight grating noise which I thought might have been the pump impeller rubbing - but I guess not. Could it be the motor? The drum rotates freely enough.
Can't remove the back as yet as I don't have a star driver.
Phil I think you are right mate! Thank you. I just removed them and there is about 1/4 inch left on one and the other is worn down to the spring connector
Poster
December 2006
hi brushes on the motor burnt out replace with new
phil grimshaw
December 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.